Circuit Board Repair Guide > Plated Hole Repair

Chapter 5 - Plated Hole Repair Procedures

This chapter of the circuit board repair guide covers various methods for plated hole repair. See Plated hole repair products.


Damaged plated hole needs repairpad 5.1 Plated Hole Repair, No Inner Layer Connection
This method covers the repair of a damaged hole that has no inner layer connection. An eyelet is used to repair the damage to the hole and the eyelet flanges replace the lands on the printed circuit board surface.

Damaged plated hole needs repairpad 5.2 Plated Hole Repair, Double Wall Method
This method covers the use of an eyelet for the repair of a damaged land on a hole that has an inner layer connect.

Damaged plated hole needs repairpad 5.3 Plated Hole Repair, Inner Layer Connection
This method describes the use of flat set eyelets for the repair of a through connection that has an inner layer connect. No surface wire is used. The inner layer reconnect is established by soldering the barrel of an eyelet to the exposed inner layer and the connection is encapsulated in high strength epoxy.


Copyright and Disclaimer Notice Copyright CircuitMedic, Haverhill, MA 01835 USA

Related Items
Professional Repair Kit | Circuit Board Epoxy | Prototyping Boards | Surface Mount Resistor Kits | Surface Mount Capacitor Kits