Circuit Bond Kit 115-1322: Liquid circuit board epoxy
Pre-measured Epoxy for Circuit Repair
Epoxy is packaged in two-compartment packages. Easy to use and no measuring.
The Circuit Bond Kit contains 10 packages of clear,
low viscosity, superior strength epoxy ideal for circuit
board use. The epoxy is precisely measured out into
two-compartment plastic packages. This adhesive is easy
to use and there’s no measuring. See below for a complete
list of items included with the Circuit Bond Kit. See
larger image of
Circuit Bond Kit contents.
Once cured, this epoxy makes an effective electrical
insulator with good high temperature mechanical and
impact resistance properties. Circuit Bond can be used
to bond replacement conductors, repair burns and circuit
board surface defects, and for many other high strength,
high temperature applications. See
and handling instructions.
You can tint Circuit Bond using
color agents which must be
purchased separately below. Color agents are designed
to mix with the epoxy to match solder mask colors commonly
found on circuit boards.
These super-sharp probes are manufactured from high quality
stainless steel. They include a plastic grip for easy handling.
These inexpensive, disposable probes are ideal for dispensing
a minute amount of epoxy, and for micro-positioning of small
Self-saturating foam swabs filled with 99% Isopropyl alcohol.
Ideal for removing flux residue and cleaning surfaces prior
to soldering, coating and application of epoxy. Overall
Length: 4.125". Squeeze handle until it "pops" releasing
alcohol into the tip.
Enlarge (Reorder no. 235-1000-5)
All products ship direct from manufacturer and are
special order/non-returnable. Will
ship within 3 business days.
Matching epoxy to the color of the circuit board being repaired
is easy when you use a color agent. Color agents may also be
applied directly to the circuit board surface for color matching.
Supplied in 1 oz. (29 ml) collapsible metal tubes. Most popular
colors are 115-9348 (Green) and 115-9358 (Light Green).