Home > Prototyping Boards

Prototyping Boards for Through Hole and SMT Components from Schmartboard

These Schmartboard prototyping boards support through hole and surface mount components. This is the fastest and easiest electronic circuit prototyping system ever conceived.

Connect your Schmartboards with our mechanical bridges. We offer assorted sizes of jumpers and headers.


Through hole prototyping board
Through Hole Boards

Schmartboard offers both generic and specialty through hole PCBs. Some of the devices supported by the specialty through hole boards are: Power, Ground, ATX Power Connectors, Audio & RCA Jacks, DB9, DB25, JTAG, RGB, Switches, RJ11, RJ45 and USB.

We have 12 different through hole PCBs for you to choose from.
   
SOIC prototyping board
SOIC Boards

SOIC (support up to 72 pins SO, SOP, QSOP, SSOP, TSSOP, PSSOP) devices can be difficult to hand solder, especially as the pin number gets bigger and the pitch gets smaller. With SchmartBoard|ez, you can hand solder up to 72 pin devices and pitches down to .4mm.

We have 6 different SOIC PCBs for you to choose from.


Watch "How To" Video (youtube):

Hand Soldering an SOIC Part with SchmartBoard|ez
   
Discrete SMT prototyping board
Discrete Surface Mount Boards

SchmartBoard|ez discrete SMT component PCBs support package types as small as 0201. Parts such as: SOT23-3, 5, 6, SC70-5, 6, DPAK, D2PAK, SOT223, TO263-7, SOT89, CASE-A, B, C, D, E, 0201, 0603, 0805, 1206, 1210, 1608, 1812, 2010, 2512 are easily hand soldered using SchmartBoard|ez technology.

We have 2 different discrete SMT PCBs for you to choose from.


Watch "How To" Video (youtube):

Hand Soldering SMT Discrete Components with SchmartBoard|ez
   
QFP prototyping board
QFP Boards

QFP (as well as TQFP & PQFP) devices can be difficult to hand solder, especially as the pin number gets bigger and the pitch gets smaller. With SchmartBoard|ez, you can hand solder up to 240 pin devices and pitches down to .4mm.

We have 7 different QFP PCBs for you to choose from.


Watch "How To" Video (youtube):

Hand Soldering a 0.5mm QFP Chip With SchmartBoard|ez
   
PLCC prototyping board
PLCC Boards

Schmartboard supports up to 84 pins PLCC package ICs with a 0.05" pitch.
   
QFN prototyping board
QFN Boards

Chip scale is becoming a very popular chip package due to the low cost of manufacturing them. They can be difficult to work though, especially in the area of creating circuit prototypes.

SchmartBoard|ez makes it easy to hand solder DFN and QFN components. Pitches of .5mm and .65mm are available in various package sizes.

We have 8 different QFN PCBs for you to choose from.

Watch "How To" Video (youtube):

Hand Soldering 0.5mm QFN Component with SchmartBoard|ez
   
SMT connector prototyping board
SMT Connector Boards

Schmartboard makes it easy to solder PCBs for connectors from companies such as Hyrose, Molex, Samtec and Tyco. Pitches from 1.25mm down to .4mm are supported. Watch "How To" Video: Hand Soldering an SMT Connector with SchmartBoard|ez
   
1.5 volt power module

SchmartModules

SchmartModules are popular circuit blocks. Why reinvent a portion of a circuit such as an RS232 or a power regulator, when you can just add a finished one to your circuit?

We have 7 different power modules for you to choose from.
   
Texas Instruments Development Board
Development Boards

Schmartboard makes development boards for some of the most popular chips that are more versatile and less expensive than other development boards you'll find.

We have 4 different development boards for you to choose from.




ELAB (Engineering Lab)       FOB Shipping Point: Fremont, CA 94536 USA

Related Items
Circuit Board Repair Kits