CC038255AG Circuit Frame, Contacts .038" x .250"

CC038255AG Circuit Frame allows you to replace damaged contacts without the mess of liquid epoxy, with a bond strength equal to the original, in just a few minutes. Circuit Frames come in a wide variety of shapes and sizes, all with a dry film adhesive backing, activated and cured with heat and pressure. Trim out the circuit you need and bond it to the circuit board surface using a Bonding Iron or Circuit Bonding System with the appropriate Bonding Tip. Bonding Iron and Bonding Tips must be purchased separately.

See our Gold Contact Repair Kit which contains everything needed to repair damaged gold edge contacts.

                      Shown Approximately 2X Actual Size
CC038255AG Circuit Frame, Contacts .038" x .250"
CC038255AG Circuit Frame, Contacts .038" x .250"


CC038255AG   Circuit Frame, Contacts .038" x .250"   US $149.00   View cart

Special Order. Usually ships within 3 business days. How to purchase.

Import duties and Value Added Tax will be collected at time of delivery for all shipments outside the USA.


Part Number: CC038255AG
Description: Circuit Frame, Contacts .038" x .250" (.965 mm x 6.350 mm)
Plating - Nickel/Gold: .000050" (.00127 mm) Gold over .000100" (.00254 mm) Nickel
RoHS Compliant: Compliant
Recommended Bonding Tip: 115-2318 (Bonding Iron and Bonding Tips must be purchased separately.)
Application: Replacing damaged gold contacts.
How to repair damaged edge contacts using new contacts and film adhesive.
Overall Circuit Frame Size: 2.25" x 1.50" (57mm x 38 mm)
Base Material: Rolled annealed copper foil .0014" (.036 mm) thick.
Adhesive Backing: B-staged modified acrylic film adhesive .002" (.051 mm) thick.
Bonding Temperature: 475°F +/- 25°F (246°C +/- 14°C)
Bonding Time: 30 seconds
Peel Strength: Minimum 8 lbs/inch (1.43 kg/cm) after cure to FR-4 material.
Shelf Life: 1 year minimum. Each Circuit Frame package is stamped with the expiration date.
Shelf-Life items may not be returned for credit.
See Also: Circuit Board Repair Kits


 
Bonding Iron and Bonding Tips

Bonding Tips fit into the hand held Bonding Iron (part no. 115-3102 for 120 VAC and part no. 115-3103 for 230 VAC) and the Circuit Bonding System (part no. 115-3118 which includes voltage converter for 120 VAC and 220 VAC). The bottom machined surface of each Bonding Tip is used to apply heat and pressure to bond the adhesive backed replacement pads, edge contacts, and lands to the circuit board surface. All our Bonding Tips are machined from high grade aluminum.

Image Description                                                            View cart Part Number
Bonding Iron 115-3102 Bonding Iron, 120 VAC, 115-3102

The Bonding Iron is set at the optimal temperature for curing the bonding film used to repair damaged surface mount pads, lands, edge contacts and other circuit board patterns. Bonding Tip is not included with purchase of Bonding Iron so remember to also select and purchase a Bonding Tip to match the shape of the new pad or circuit. Enlarge

115-3102

US $109.00

 

115-2318 Large Rectangle Tip .080" x .500"
Bonding Tip 115-2318

.080" x .500" (2.03mm x 12.70mm)

Large Rectangle

115-2318

US $45.00

 
Bonding Iron 115-3103 Bonding Iron, 230 VAC, 115-3103

The Bonding Iron is set at the optimal temperature for curing the bonding film used to repair damaged surface mount pads, lands, edge contacts and other circuit board patterns. Bonding Tip is not included with purchase of Bonding Iron so remember to also select and purchase a Bonding Tip to match the shape of the new pad or circuit. Enlarge

115-3103

US $179.00

 

Products above ship direct from manufacturer and are special order/non-returnable. Will ship within 3 business days.





ELAB (Engineering Lab)       Copyright All rights reserved.

Related Items
Professional Repair Kit | Circuit Board Epoxy | Prototyping Boards | Surface Mount Resistor Kits | Surface Mount Capacitor Kits